12 SMT lines + 2 DIP lines + 2 soldering lines + 2 test lines + conformal coating line · 2 depaneling routers — 1 million automotive PCBA boards per month See line configuration →
Home›Capability & Equipment

Capability & Equipment
Check every number against the nameplate

Every figure below is our published baseline — verify them on site against machine nameplates. Capacity: 20 million placement points per day across 12 lines; up to 1 million automotive PCBA boards per month.

Process parameters

Published baselines

Industry-general ranges below; your product's actual limits come from engineering review.

COMPONENTS

Placement range

Mainstream 0201 (0.6×0.3mm); minimum supported 01005 (0.4×0.2mm). Fine-pitch BGA/CSP to 0.25mm pitch; QFP/QFN to 0.3mm lead pitch; 2,000+ balls per board.

  • Double-sided mixed SMT
  • Board thickness 0.4–4.0mm
  • Odd-form and heavy connectors via DIP line
CAPACITY

Throughput

20 YAMAHA mounters (YRM20 ×16, YRM10 ×4) across 12 lines — 20 million points per day. Automotive PCBA mainboards: 1 million boards per month, all lines combined.

  • Prototype from 5 boards
  • Prototypes 3–5 working days
  • Volume scheduled by points + kitting
QUALITY

Detection chain

3D SPI after print (100%), inline 3D AOI after placement (100%), X-Ray on BGA before release, FAI confirmed by the customer before volume.

  • Sinic-Tek 3D SPI
  • 3D AOI 360° inspection
  • X-Ray void/shift/bridge judgment
Equipment

Line-up by process

Front end

GKG G9+ automatic solder paste printers · Sinic-Tek 3D SPI · stencil tension testers · YAMAHA YRM20 ×16 and YRM10 ×4 placement modules · smart FAI first-article tester.

    Back end

    MELT R-1000VAC ten-zone lead-free reflow ovens · inline 3D AOI · X-Ray imaging · R&S CMW500 RF tester · GAM320 depaneling routers · 2 DIP lines + 2 soldering lines · conformal coating line.

      Capability boundary

      What we do not claim

      Honest limits save both sides time.

      What we build

      Rigid PCBAs, rigid-flex assembly with DIP support, panels to 4.0mm thickness, boards with fine-pitch BGA and micro components, box-build with functional test.

        What we review first

        Extremely high layer counts, exotic substrates, ultra-fine 01005-dense designs — these go through engineering review before we quote, and we say plainly what we can and cannot commit to.

          Send Gerber & BOM — executable quote within 24 hours

          Engineers run a DFM review before quoting: we quote what we can build and state risks upfront. WhatsApp +86 136-8258-5455 or email coyo86@126.com — direct to the sales lead, no middlemen.

          PCBA Quotation Request

          Fill this in and submit — it generates a ready-to-send inquiry for WhatsApp/email. Urgent? Message +86 136-8258-5455 directly.
          ✅ Your inquiry is ready — your email app will open with the message pre-filled. You can also copy the text below into WhatsApp to +86 136-8258-5455: